Smith and Wesson Handcuffs

At 911 Gear.ca we carry Smith and Wesson Handcuffs. Smith & Wesson Handcuffs are fabricated from the finest quality carbon or stainless steel. They are made with heat treated internal lock works, featuring smooth ratchets for swift cuffing and double locks to prevent tampering.

From the original Model 100 series handcuffs to the unmatched durability of our restraint chains and leg irons. Smith & Wesson is a proven worldwide leader in handcuff and restraint production. Along with the key actuated lock, all of our handcuffs come with a double locking system. The double locking system is actuated by means of a slot lock, push pin lock or the new,

Smith & Wesson Model 100-1 Handcuffs

Smith & Wesson Model 100-1 Handcuffs and 100-1B handcuff is the blued (black oxide) version are constructed of nickel plated carbon steel. Carbon steel provides strength and nickel plating creates a corrosion resistant surface. The satin nickel finish is not shiny and makes the handcuffs appear cloudy. They do this to ensure the handcuffs are both non-reflective and easy to grip.

These handcuffs use the slot lock double locking mechanism, to double lock these handcuffs insert the double lock pin on your handcuff key into the double lock slot and pull down towards the keyhole. Double locking handcuffs makes them harder to shim, it also prevents the handcuffs from being further tightened. When double locked, handcuffs cannot be tightened or picked. Includes two handcuff keys, Smith & Wesson's lifetime warranty and instructions

  • Material: Carbon Steel
  • Finish: Stainless or Blued Finish
  • Wrist Opening: - First Notch 2.04" (5.2 cm)
  • Inside Perimeter: - First Notch 8.40" (21.3 cm)
  • Inside Perimeter: - Last Notch 5.80" (14.7 cm)
  • Inside Perimeter: - Tightest 1.80" (4.6 cm)
  • Weight: 11.2 oz (317.5 g)
  • Number of Locking Positions: 23
  • Distance Between Cuffs: 2.00" (5.1 cm)
  • Maximimum Overall Length: 8.98" (22.8 cm)

Smith and Wesson M&P 100 Series - Lever Lock - PATENTED M&P LEVER LOCK

All Smith & Wesson Handcuffs are proudly made in U.S.A. Insert the small peg on the top of the key into the double lock slot. In this position, the small peg can contact the end of the lock spring. Slide the key toward the key hole.
This causes the lock spring to move into a position that locks the bolt thus preventing the cuff from being further tightened. Using the small peg on the top of the key, fully depress the push pin. This will lock the bolt as described
with the double slot lock. This causes the lock spring to move into a position that locks the bolt thus preventing the cuff from being further tightened.

With the tip of your finger, fully lift the lever and then allow it to return.
Once this has been done, the double lock will be set. This causes the lock spring to move into a position that locks the bolt thus preventing the cuff from being further tightened. NO TOOL

  • Material: Carbon Steel
  • Finish: Nickel / Blued Finish
  • Wrist Opening: - First Notch 2.04" (5.2 cm)
  • Inside Perimeter: - First Notch 8.40" (21.3 cm)
  • Inside Perimeter: - Last Notch 5.80" (14.7 cm)
  • Inside Perimeter: - Tightest 1.80" (4.6 cm)
  • Weight: 11.4 oz (323.2 g)
  • Number of Locking Positions: 23
  • Distance Between Cuffs 2.00" (5.1 cm)
  • Maximimum Overall Length: 8.98" (22.8 cm)

Smith & Wesson Handcuffs are fabricated from the finest quality carbon or stainless steel. They are made with heat treated internal lockworks,
featuring smooth ratchets for swift cuffing and double locks to prevent tampering. From the original Model 100 series handcuffs to the unmatched durability of our restraint chains and leg irons – Smith & Wesson is a proven
worldwide leader in handcuff and restraint production.

Along with the key actuated lock, all of our handcuffs come with a double locking system. The double locking system is actuated by means of a slot lock, push pin lock or the new, patented M&P lever lock – depending on the
model.